Industrial components, supplied and machined to spec.
A single source for MS and SS piping, valves, pumps, drives and precision machine work — backed by our own workshop in Lahore.
- Years in the trade
- 20+Years in the trade
- Product lines
- 8Product lines
- Plants served
- 250+Plants served
Eight product lines, one supplier
From a single gasket to a reconditioned pump set — everything below is quoted, machined or sourced by us.
01MS / SS Pipes & Fittings
Mild steel and stainless seamless or welded pipe, plus the elbows, tees, reducers and flanges to run it.
4 items
02MS / SS Valves
Ball, gate, globe, butterfly and check valves in carbon and stainless steel, flanged or threaded.
4 items
03Electrical & Mechanical Consumables
Cable, switchgear, lighting, fasteners, gaskets, bearings and the everyday spares a maintenance store runs out of.
4 items
04Pumps / PHE
Centrifugal, in-line and multistage pumps plus plate heat exchangers — new or reconditioned.
4 items
05Machine Work
Shafts, impellers, sleeves and bearing housings turned, repaired and balanced in our own workshop.
3 items
06Danfoss Valves & VFD
Danfoss refrigeration and control valves plus variable frequency drives, new or used.
3 items
07Axial & Exhaust Fans
Axial, exhaust and centrifugal fans for plant ventilation, cooling and fume extraction.
3 items
08HDPE & UPVC Pipes
Plastic piping systems for water supply, drainage, irrigation and chemical lines.
3 itemsSupply is half the job
The other half is knowing what fits, what can be repaired, and what has to be replaced.
Supply & procurement
MS and SS piping, fittings, valves, fasteners and electrical consumables held or sourced against your specification and delivery date.
Machine work & repair
Shafts, impellers, sleeves and bearing housings turned, re-sleeved and balanced in our own workshop — rebuilt to drawing, not guessed.
Drives & rotating equipment
Pumps, plate heat exchangers, axial and exhaust fans, Danfoss valves and VFDs, supplied new or reconditioned with a tested alternative when lead times bite.
Built around plant uptime
Industrial Components supplies the piping, flow control, rotating equipment and consumables that keep plants running — and machines the parts that wear out. We work from a head office at PCSIR in Lahore and a machine workshop on Sheikhupura Road. Because the workshop is ours, a worn shaft or impeller is measured, quoted and cut without waiting on a third-party shop. Much of what we handle is bought against a shutdown date rather than a catalogue. Send the specification, a drawing or a photograph of the failed part, and we will come back with a price and a lead time we can actually hold.
- 01
One source, fewer purchase orders
Piping, valves, rotating equipment, drives and machine work come off a single quotation and a single delivery note.
- 02
An in-house workshop
Because we machine our own parts, a worn shaft or impeller is measured, quoted and cut without waiting on a third-party shop.
- 03
New or used, honestly described
Where a reconditioned pump or drive is the sensible answer we say so, and we tell you exactly what was replaced.
- 04
Built for plant deadlines
Shutdowns do not move. We quote against your outage window and flag anything that will not make it in time.
Frequently requested
A sample of what moves through the workshop most weeks.
Cased Axial Fan
Tube-cased axial fan with direct-drive motor for in-duct mounting.
End-Suction Centrifugal Pump
Back pull-out centrifugal pump on a common baseplate with motor.
HDPE Pipe
PE80 and PE100 pipe in coils and straight lengths.
MS Seamless Pipe
Carbon steel seamless pipe for steam, water and process lines.
Pump & Blower Shaft Machining
New shafts turned to drawing, or worn journals built up and reground.
SS Ball Valve
Two- and three-piece stainless ball valves with PTFE seats.
Send us the spec
Sizes, materials, quantities, a drawing or even a photo of the worn part — whatever you have is enough to start.
- Phone
- +92 331 0045332
- Workshop
- Sheikhupura Road, Lahore
- Head office
- PCSIR, Lahore
Prefer the full contact page? Open it here.